1303 HDR Production Monitor

$ 3,499.00

Category:

Description

Clarity that produces certainty.

The display size, resolution, and pixel density of the 1303 production monitor make it an invaluable tool for precision focus pulling. When you don’t have the time or proper measurements, a razor-sharp, low latency display will help you hit your marks.

Calibrated for collaboration.

Preview what you’re sending downstream using the Output Preview Page, while utilizing software features like customizable focus assist and peaking on your 1303 monitor. If it’s the only monitor near by, its color accuracy (100% REC 709) and broad viewing angle make it easy to share with clients and directors.

Can you see me now? Good.

With a panel roughly 3x brighter than most production monitors, the 1303 is not restrained by ambient light. Its optically bonded LCD combats glare and sunlight, allowing you to pull focus in less than ideal shooting environments.

Proper power options.

Power options for the 1303 monitor are simple and convenient. The 2-pin LEMO out allows for a seamless integration with accessories such as the Teradek Bolt wireless receiver.

Travel made easy: carry-on accessories.

All SmallHD® production monitors are equipped with the Rapid Rail Mounting System; the simplest way to connect, store, and travel with critical monitor accessories.

Smooth is fast.

Transitioning from table to C-Stand happens safely and securely with the 1303’s VESA compatible mounting accessory.

Boldly go.

The 1303 monitor is the perfect blend of functionality and portability. With a razor-sharp display and a rugged build quality, the 1303 will boldly go where no other production monitor has ever gone before.

Specs

Display

Panel Type

IPS

Size Diagonal

13

Resolution

1920×1080

Pixel Density (PPI)

170 PPI

Aspect Ratio

16:9

Active Area

11.59” x 6.52”

Brightness

1500 nits

Contrast

1140:1

Color Gamut

100% Rec.709

Color Depth

10­ bit

Viewing Angle

178 Deg.

Backlight Type

LED

Adjustable Backlight

Yes

Temperature Adaptive Color

No

Input Signal Types/Formats

3G-SDI

YCC 4:2:2 @ 10 bits: 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88, 1080i100

HD-SDI

YCC 4:2:2 @ 10 bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psF30, 1080psF29.97, 1080psF25, 1080psF24, 1080psF23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98

SD-SDI

480i29.97, 576i25

HDMI

Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50

Component

Not Supported

Composite

Not Supported

Audio

HDMI & SDI ­ Monitor through Speakers in Front Bezel or through Headphone Jack ­ Metering up to 8 channels

Output Signal Types/Formats

3G-SDI

YCC 4:2:2 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88,

HD-SDI

YCC 4:2:2 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 all at 8 bits

SD-SDI

Not Supported

HDMI

Supports YCC 4:2:2@ 8 bits, RGB & YCC 4:4:4 @ 8 bits: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50, 480i120, 480i119.88, 480i60, 480i59.94, 576i100, 576i50

Component

Not Supported

Composite

Not Supported

Audio

Audio sent downstream unless a LUT is loaded on the output page which disables Audio out.

Connector Type

SDI

2x 3G Inputs, 2x 3G Outputs

HDMI

1x Input, 1x Output

Component

Not Supported

Composite

Not Supported

Audio

1x Headphone Jack on Front of Monitor

Power In

1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max

Power Out

1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max

USB

1x Front USB2, 2x Rear USB2

Controls

Primary Control Interface

Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: Image Capture; LUT Selection; Backlight Level; Input Selection; Scopes Toggle.

Record/Capture

Dedicated Image Capture Button on Front Bezel

Data I/O

Storage

SD Card for LUTs, Captured Images, Image Overlays, Profile Saving & Loading, Firmware Upgrades

USB

1 Front & 2 Rear USB Ports for power (1.5A shared total), LUT Loading, Profile Saving & Loading

Power

Connector Type

1x XLR 4-pin 12 – 34VDC IN; 12V Lemo 2-pin OUT 4A Max

Voltage

12 – 34VDC

Power Consumption

25 – 39W

Recommended Power Supply

AC – DC Power Converter “Brick” Included with Monitor 110 – 240VAC 50 – 60 HZ INPUT; 15V – 6A OUTPUT

Battery Types

Gold Mount / V­Mount via 4­pin XLR Connector

Output Voltage (VDC)

12V, 2A max via LEMO Connector

Environmental

Compliance

FCC, IC, CE, RoHS

Operating Temperature

32F ­- 100F

Storage Temperature

33F – 115F

Screen Protection

Acrylic or Anti-Reflective Acrylic screen protetor available as an option

Height

9″ (22.86cm)

Width

13″ (33.02cm)

Depth/Length

2.88″ (7.32cm)

Weight (Item Only without battery)

128oz (3628.74g)

Weight (Packaged)

12lb (5.44kg)

Mount Points

2x ¼”-20 on Top, Left & Right sides; RapidRail – Cold Shoe style rails on rear of monitor

Software

Pixel Zoom (type)

2x & 4x Zoom with smooth pan via joystick

Frame Guides

Yes: Preset Aspect Ratios & Customizable

DSLR Scale

Canon 5DMkii & Canon 7D

Custom Scale

Yes: Underscan & Overscan

Anamorphic De-Squeeze

Yes: 1.33x, 1.5x, 1.66x, 2.0x

Image Rotate(Manual/Automatic)

Yes – Automatic or Manual

Image Flip (Manual/Automatic)

Yes – Automatic or Manual

Cross Conversion

Yes: HDMI → SDI & SDI → HDMI

Focus Assist (Colors)

Yes ­ User Adjustable Color and Intensity

Peaking

Yes ­ User Adjustable Intensity

False Color

Yes ­ Rainbow & Arri Style

Zebra

Yes ­ Dual ­ User Configurable

Waveform

Yes ­ Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting

Vectorscope

Yes – with Optional Skintone line

RGB Parade

Yes ­ Fully User Customizable

Histogram

Yes ­ Luma & RGB Style

Image Capture

Yes ­ With Dedicated Button

Custom LUTS

Yes ­ Loadable by Page or as Systemwide Color Calibration

LUT Downstream

Yes ­ Available on SDI 1 or HDMI Out

LUT Import

Via SD Card or USB storage device

Image Overlay

Yes with Intensity Slider and Blink Setting

Firmware

User Upgradable. Compatible with 1303-1703-2403-3203 Firmware Version 1.1 and later

Audio Meters

Yes ­ HDMI & SDI up to 8 channel